Deye 8kW Single-Phase Hybrid Inverter
The Deye SUN-8K-SG06LP1-EU-CM3 is a high-performance 8kW single-phase low-voltage hybrid inverter engineered for both residential and light commercial energy storage applications. Built with an IP65-rated enclosure, it is suitable for indoor or outdoor installation and features a colorful touch LCD for intuitive system monitoring and configuration.
Designed for maximum energy independence and flexibility, this unit supports up to 16 inverters in parallel for both on-grid and off-grid operation, as well as multiple batteries in parallel. With three independent MPPT trackers (2+1+1 string configuration), a high 185A maximum charge/discharge current, and AC coupling capability, it seamlessly integrates into new solar installations or retrofits existing solar systems.
Key Features
-
High Solar Oversizing: Supports up to 16,000W max PV access power (12,800W max PV input power) across 3 MPPT trackers.
-
Flexible Energy Management: Features 6 programmable time periods for battery charging and discharging to optimize Time-of-Use (ToU) tariffs.
-
Generator & Retrofit Ready: Supports AC coupling to retrofit existing solar setups and stores energy directly from a diesel generator.
-
Scalable Architecture: Parallel capability for up to 16 units in on-grid and off-grid modes, with self-adaptive BMS communication for Lithium-ion or Lead-acid batteries.
-
Robust & Quiet: IP65 ingress protection with intelligent air cooling keeping noise levels below 45dB.
Technical Data: SUN-8K-SG06LP1-EU-CM3
| Category | Parameter | Specification |
| Model | Model Number |
SUN-8K-SG06LP1-EU-CM3 |
| Battery Input Data | Battery Type |
Lead-acid or Lithium-ion |
| Battery Voltage Range (V) |
40–60 V |
|
| Max. Charging Current (A) |
185 A |
|
| Max. Discharging Current (A) |
185 A |
|
| Charging Strategy for Li-ion Battery |
Self-adaption to BMS |
|
| Number of Battery Inputs |
1 |
|
| PV String Input Data | Max. PV Access Power (W) |
16,000 W |
| Max. PV Input Power (W) |
12,800 W |
|
| Max. PV Input Voltage (V) |
500 V |
|
| Start-up Voltage (V) |
125 V |
|
| MPPT Voltage Range (V) |
150–425 V |
|
| Rated PV Input Voltage (V) |
370 V |
|
| Max. Operating PV Input Current (A) |
36A + 18A + 18A |
|
| Max. Input Short-Circuit Current (A) |
54A + 27A + 27A |
|
| No. of MPP Trackers / Strings per MPPT |
3 / (2 + 1 + 1) |
|
| AC Input/Output Data | Rated AC Input/Output Active Power (W) |
8,000 W |
| Max. AC Input/Output Apparent Power (VA) |
8,800 VA |
|
| Rated AC Input/Output Current (A) |
36.4 A / 34.8 A |
|
| Max. AC Input/Output Current (A) |
40 A / 38.3 A |
|
| Max. Continuous AC Passthrough (grid to load) |
70 A |
|
| Peak Power (off-grid) |
2 times of rated power, 10s |
|
| Power Factor Adjustment Range |
0.8 leading to 0.8 lagging |
|
| Rated Input/Output Voltage / Range (V) |
220/230V (0.85Un–1.1Un) |
|
| Rated Input/Output Grid Frequency / Range (Hz) |
50Hz (45–55Hz) / 60Hz (55–65Hz) |
|
| Grid Connection Form |
L + N + PE |
|
| Total Current Harmonic Distortion (THDi) |
< 3% (of nominal power) |
|
| DC Injection Current |
< 0.5% In |
|
| Efficiency | Max. Efficiency |
97.6% |
| Euro Efficiency |
96.5% |
|
| MPPT Efficiency |
> 99% |
|
| Equipment Protection | Integrated Protections |
DC Reverse Polarity, AC Output Overcurrent, Thermal, AC Output Overvoltage, AC Output Short Circuit, DC Component Monitoring, Anti-islanding, DC Switch, Insulation Impedance Detection, Residual Current Detection, Arc Fault Circuit Interrupter (optional) |
| Surge Protection Level |
Type II (DC), Type II (AC) |
|
| Interface | Display |
Colorful Touch LCD |
| Communication Interface |
Wi-Fi, RS485, CAN |
|
| General Data | Operating Temperature Range (°C) |
-40°C to +60°C (derating above 45°C) |
| Permissible Ambient Humidity |
0–100% |
|
| Permissible Altitude |
3,000 m |
|
| Noise Level (dB) |
< 45 dB |
|
| Ingress Protection (IP) Rating |
IP65 |
|
| Inverter Topology |
Non-Isolated |
|
| Over Voltage Category |
OVC II (DC), OVC III (AC) |
|
| Cabinet Size (W × H × D mm) |
340 × 580 × 234 mm (excluding connectors and brackets) |
|
| Weight (kg) |
24.6 kg |
|
| Type of Cooling |
Intelligent Air Cooling |
|
| Warranty |
5 Years / 10 Years (depends on final installation site) |
|
| Certifications & Standards | Grid Regulation |
IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G99, VDE-AR-N 4105 |
| Safety / EMC Standard |
IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 |






